1: the finished WED sculpt covered with clear acrylic spray for easyer and cleaner release from the silicone.
2: The first layer of silicone(100ml) ( RTV silicone rubber for molds). I used a soft brush to apply it and blowed air to it with the airbrush to eliminate any airbubbles. Also added a small piece of elastic cloth mesh to the forehead so that the silicone wouldn't tear while trying to get the cast out.
5: Here you can see how and where the silicone was cut. (The sculpt was removed here).
1:Filling the bucket with 850ml of translucent poyester resin.It's called MPAL and that's it's original color before i add white oil color and catalyst to it.
2: I add that amount of white oil color in the resin. The oppacity or translucency of the cast depends on the ammount of color in the mix. I found out that this is a good ratio.
3:Mixing the color good first and then adding the catalyst. (10-12g per kg).
Next time i'll post the process of the painting on a piece like that.